DETAILED DESCRIPTION
Based on the distribution amplifier that was built into my rubidium reference power and glue logic board.
Includes optional different power contacts (header or screw terminals), pads for using surface mount reservoir capacitors, an inline ferrite bead and a local regulator for power supply noise rejection, and an optional low pass filter to clean up high frequency noise on the input line.
Can output a maximum of about a 1Vpp sine wave on each output, and each output is seperately buffered. Gain is configurable for smaller input signals with a swap of a resistor.
Authors
- /
- Active Participants
Components & Releases
Fabricate
Delete release
Are you sure you want to delete this Release?
This action cannot be undone.
Unable to download from CircuitMaker
You cannot download files inside CircuitMaker.
Please, open this page in browser and download file from there.
To copy hyperlink, press Ctrl+C with selected text below:
Comments ()